|
Products » Doors » Hollow Metal
|
Standard throat 47/8”
Other Throat Sizes In Stock:
3 1/2, 3 3/4, 4 5/8, 5 3/8, 5 3/4, 6 1/8, 7 1/4, 7 3/4, 8 1/2
- Frames shall be manufactured for Accurate Door & Hardware, Inc., Newark, New Jersey.
- Prime quality 16 gage roller leveled cold-rolled galvanized steel. Note: 14 gage 4 7/8 also available.
- Head and jamb trim accurately mitered to achieve a precision hairline joint assembly.
- Pressure-fit adjustable anchors provide rigidity in drywall installation.
- Dust boxes for masonry applications, wire anchors on request.
- Optional: WHI label service.
- Optional: Factory welded frames.
- Hardware Preparation
- Frames for 1 ¾” doors.
- 3 – 4 ½” Template Hinge Cutouts
- 4 7/8” ASA strike plate.
- Hole punched for door silencers.
|
| |
|
|
|
|
|
|
1. Frame out according to dimensions |
2. Install hinge jamb first |
3. Install head, certain that tabs interlock |
4. Install opposite jamb; level frame |
5. Tighten pressure tab. |
6. Bend over head tabs; screw on base clips |
| |
The Six Basic Requirements For A Fire Rated Opening |
|
|
|
|
|
|
| 1. Fire Rated Opening |
4. Steel Ball-Bearing Hinges |
|
| 2. Labeled Fire Door Frame |
5. Approved Closer |
|
| 3. Labeled Fire Door |
6. Approved Latching Device |
|
| |
with Proper Latching Strength |
|
| |
|
Frames with a 4” Head add to list: $14
for up to 3’0”
$28 for up to 6’0” |
For 14 gauge frames (4 7/8”)
add 25% |
| |
|
| |
|
|
 |
| |
|
|
